FLANGED COUPLING FOR PEXGOL PIPES

Home » Products » Pexgol Instrumenta » Flanged Coupling for Pexgol Pipes

Available in sizes from diameter 63mm to 710mm.

The couplings can be used for the full range of temperatures and pressures, the same as Pexgol pipes. Pexgol flanged couplings consist of either two halves or four quarters depending on the pipe size. The body of the coupling is made of spheroidal cast iron GGG40 (ASTM A-536). The inner surface of the coupling has special stainless steel teeth.

These teeth penetrate into the pipe wall during tightening of the coupling and provide good anchoring onto the pipe, preventing the pipe from pulling out from the fitting. The flanged couplings are supplied with an integral gasket and bolts for connecting the two halves or four quarters.

The gasket seals between the coupling and the pipe, and also between the coupling and the opposite flange.

The gasket is designed so that the coupling does not come into contact with the liquid flowing through the pipe.

The standard gasket is made of EPDM; other materials are applied according to special order. The flange has oval holes designed to fit most international standards; see table.

Installing the coupling is simple and easy:

  • Place the gasket on the pipe.
  • Open the screws and apply anti seize lube.
  • Place the coupling around the pipe and tighten the screws equally. Recommended: use of electric rattle guns.
  • For connecting two flanged couplers use the table “Bolts for connecting 2 flanged couplings” if needed.

A complete installation manual is available upon request.

Compatibility with international flange standards

Cat. No.Pipe OD (mm)Nominal Flange SizeDINANSIBSTD
DN (mm)Inch263226332634125150300
101625
5080632063502″VVVVVV
5080752575652½”VVVV
5080903090803″VVVVVV
508110401101004″VVVVVVV
508125401251004″VVVVVVV
508140601401506″VVVVV
508160601601506″VVVVV
508180601801506″VVVVV
508200802002008″VVVV
508225802252008″VVVVV
5082501025025010″VVVV
50928010280 ASA10″VVV
50828010280 BS250V
5083151231530012″VVVV
5083551435535014″VV
5084001640040016″VV
5084501845045018″VV
5085002050050020″VVVVV
5086302463024″VV
5087102871028″VV

General dimensions of flanged couplings and bolts for connecting 2 quarters of coupler.

Cat. No.Outside diameter of pipe (mm)Nominal Flange sizeACBolt size (in)Bolt length (mm)*No.of boltsWeight (kg)
DNInch
5080632063502165703/8″4042.7
5080752575652 1/2″185801/2″4542.5
5080903090803208961/2″4544
5081104011010042421105/8″4586.5
5081254012510042421105/8″4588
5081406014015062851205/8″50810
5081606016015062851205/8″50811.2
5081800618015062851195/8″50812.1
5082008020020083481305/8″50813
5082258022520083441305/8″50812.4
50825010250250104101505/8″60817
50928010280 ASA104051605/8″60820
50828010280 BS2504051605/8″60820
50831512315300124751803/4″70827.7
50835514355350145352003/4″70840
50840016400400166002153/4″70855
50845018450450186352353/4″70865
50850020500500207152803/4″80868
50863024630248402803/4″80886
50871028710289303203/4″808135

Bolts for connecting 2 flanged couplings

Pexgol Pipe Dia.Flange sizeBolt size**Bolt length (mm)**No.of boltsTorque N x mTorque ft x lbs
Min.MaxMinMax
632″5/8″16mm50433492436
752 ½”5/8″16mm50433492436
903″5/8″16mm50433492436
1104″5/8″16mm50833492436
1254″5/8″16mm50833492436
1406″3/4″20mm60846693450
1606″3/4″20mm60846693450
1806″3/4″20mm60846693450
2008″3/4″20mm60864994773
2258″3/4″20mm60864994773
25010″7/8″22mm701264994773
28010″7/8″22mm701264994773
31512″7/8″22mm7089314068103
35514″1″25mm701213018095132
40016″1″25mm751213018095132
45018″1 1/8″28mm751613018095132
50020″1 1/8″28mm1001612518592136
56022″1 1/8″28mm10020170200125147
63024″1 1/4″28mm11020170200125147
71028″1 1/4″28mm11028170200125147

We are ready to provide you with a quote for your project.

Start typing and press Enter to search